The door handle used in this project is the Constructor CON4215 Prelude Entry Lever Door Lock, Antique Copper.
Step 1 Locate the pin hole at the base of the interior handle.
Push in with the included pushpin tool to release the handle. You can also use a paperclip as a pushpin. Pull the handle apart.
“Push in with the included pushpin tool to release the handle. You can also use a paperclip as a pushpin.”
Step 2 Turn the handle to align the pin hole for the exterior handle. Push in with the included pushpin tool to release the handle. Pull the handle apart.
Step 3 Install the latch and strike plate if necessary.
Step 4 Reverse the handle bases to align with the new handle configuration. If you do not reverse the handle base the handle will not lock into place when you reverse the handle.
Step 5 Install the interior and exterior handles in the preferred configuration. Carefully aligning the pin holes on the base with the pin holes on the handles. Push firmly to lock handles in place. A clicking sound will confirm the connection.
Step 6 Test the lock and latch.
Congratulations you have successfully reversed your door handle.
As an Amazon Associate, I earn from qualifying purchases.
I get commissions for purchases made through links in this post.
The Lever Door Lock Handle set used in this blog post and video can be purchased at Amazon. If you are interested in purchasing this item you can click on the Amazon Shop now button or the link below.
Prelude Passage by Constructor Get yours today at Amazon.
Comments